ERWIN C. CARAMBA
Hornby,CAN
Summary
Detail-oriented Steel Fixer experienced in reading technical drawings and executing precise cutting, bending, and tying of rebar for structural projects. Contributed to successful project completions through strong teamwork and a commitment to safety, achieving a record of zero safety incidents. Demonstrated reliability and efficiency while effectively operating various tools and equipment in diverse working conditions.
Overview
15
15
years of professional experience
Work History
Steel Fixer
Reofab Limited
Hornby, Christchurch
06.2026 - Current
- Read reinforcement drawings for Reofab Limited structural steel installations.
- Cut, bend, and shape steel bars to required specifications.
- Tie rebar cages for beams, slabs, columns, and foundations.
Civil Construction Worker
Johnston Civil Limited
Halswell, Christchurch
02.2026 - 06.2026
- Excavated trenches for drainage and utility installation on civil sites
- Assisted earthworks crews with site preparation and material handling
- Operated hand tools for concrete finishing and formwork support
- Compacted backfill and prepared surfaces for road and pavement works
- Maintained safe work areas with traffic control and hazard checks
- Supported supervisors with daily civil tasks and site cleanup
- Observed safety protocols while working on site including wearing protective gear at all times.
Steel Fixer/Rough Carpenter
Freelance
Molave Mindanao Philippines
02.2023 - 03.2025
- Installed reinforcing bars and mesh to strengthen concrete structures.
- Ensured proper alignment and spacing of reinforcement as per design.
- Interpreted technical drawings and construction plans to ensure accurate rebar placement.
- Measured, cut, and bent steel bars according to project specifications.
- Followed safety protocols and used protective gear to prevent accidents.
- Check formwork for accuracy prior to pouring of concrete into it.
- Dismantle and remove formwork after use from completed projects ready for next job.
- Clean up debris from worksite upon completion of job duties.
Reinforcing Bar Construction( Steel Fixer )
HIRAKAWA TEKKIN KOUGYOU LTD.
Chou Kagoshima City, Japan
10.2017 - 11.2022
- Determined quantities, sizes, shapes, and locations of reinforcing rods based on blueprints, sketches, and oral instructions to ensure accurate installation.
- Spaced and fastened rods in forms according to blueprints, using wire and pliers, to maintain structural integrity.
- Spaced and fastened rods in forms utilizing wire and pliers to ensure adherence to blueprints.
- Positioned blocks beneath rebar to elevate bars off the deck during floor reinforcement. to hold the bars off the deck when reinforcing floors.
- Cut and fitted wire mesh or fabric with hooked rods, positioning material in concrete to enhance reinforcement quality.
- Bend steel rods with hand tools or rod bending machines and weld them with arc-welding equipment.
- Cleared debris from worksite after project completion to maintain safety and organization.
- Engaged in clear communication with tradespeople to discuss jobsite progress and updates. with other tradespeople regarding progress on jobsite.
- Work collaboratively with supervisors to ensure timely completion of assigned tasks within budgeted cost parameters.
WELDER
SAMSUNG SAUDI ARABIA Co., Ltd.
Riyadh, Kingdom of Saudi Arabia
09.2016 - 01.2017
- Company Overview: Collaborated with client Aramco on Saudi Arabia oil and gas project
- Executed flat, vertical, and horizontal welding; brazed, soldered, and coated nonferrous metals; inspected, brushed, and ground welds to ensure quality standards.
- Preheated and cleaned metals, laid out, cut, and fitted materials for welding, selecting proper welding heat and electrode type and size for optimal penetration and strength.
- Conducted safety inspections of equipment and accessories to maintain operational safety and compliance.
- Operated hand and power tools for various metalworking tasks.
- Communicated hazard warnings to team members to promote safety awareness.
- Client: Aramco Saudi Arabia Oil and Gas Project
WELDER
SAMSUNG SAUDI ARABIA Co., Ltd.
Yanbu, Kingdom of Saudi Arabia
11.2015 - 08.2016
- Company Overview: Provided consulting services for Saline Water Conversion Corporation.
- Client: (SWCC) Saline Water Conversion Corporation
- Performed flat, vertical, and horizontal welding; brazed, soldered, and coated nonferrous metals; inspected, brushed, and ground welds to ensure quality standards.
- Operated hand and power tools effectively for various welding projects.
- Utilized protective clothing and equipment to ensure safety during welding tasks.
- Conducted safety inspections of welding equipment and accessories to ensure compliance.
- Followed safety protocols for tool usage to prevent workplace accidents.
WELDER
ROMSAM CONSTRUCTION INC.
Sta. Cruz, Philippines
06.2015 - 10.2015
- Conducted safety inspections of equipment and accessories to ensure compliance with safety standards.
- Utilized protective clothing and equipment to ensure safety during operations.
- Utilized hand and power tools to complete various tasks effectively.
- Communicated hazard warnings to team members to maintain a safe working environment.
- Followed safety protocols for tool usage to prevent accidents.
- Maintained a clean and organized work area to promote safety and efficiency.
ASSISTANT WELDER
OZ ASSESS AND TRAINING CENTER INC.
Malate, Manila
04.2012 - 05.2015
- Assisted lead welder in welding metal and iron frameworks, gaining hands-on experience and knowledge of welding techniques.
- Collected materials from storage areas for welding tasks., clean the welding shop area and perform light maintenance on welding equipment.
- Pick up materials, clean the welding shop area and perform light maintenance on welding equipment.
- Wore safety shoes to comply with regulations to ensure compliance with safety regulations,, goggles, gloves and masks designed for protection against the extreme heat from the welding torch during the welding process.
- Supported welding, brazing, and cutting activities by moving workpieces, tools, and supplies efficiently, ensuring smooth workflow.
Education
Flux Cored Arc Welding / NCII -
Oz Assess And Training Center Inc.
Shielded Metal Arc Welding / NCII -
Oz Assess And Training Center Inc.
Molave Vocational Technical School -
Hotel and Restaurant Management -
Datamex Institute Of Computer Technology
ManilaSkills
- Rebar tying expertise
- Rebar placement knowledge
- Rebar measurement and cutting
- Rebar alignment and spacing
- Reinforcing steel proficiency
- Concrete reinforcement experience
- Steel fixing safety
- Structural measurement
- Power and manual tools
- Emergency response
- Project collaboration
- Physical fitness for labor
- Worksite adaptability
- Detail-oriented quality focus
Timeline
Steel Fixer
Reofab Limited
06.2026 - Current
Civil Construction Worker
Johnston Civil Limited
02.2026 - 06.2026
Steel Fixer/Rough Carpenter
Freelance
02.2023 - 03.2025
Reinforcing Bar Construction( Steel Fixer )
HIRAKAWA TEKKIN KOUGYOU LTD.
10.2017 - 11.2022
WELDER
SAMSUNG SAUDI ARABIA Co., Ltd.
09.2016 - 01.2017
WELDER
SAMSUNG SAUDI ARABIA Co., Ltd.
11.2015 - 08.2016
WELDER
ROMSAM CONSTRUCTION INC.
06.2015 - 10.2015
ASSISTANT WELDER
OZ ASSESS AND TRAINING CENTER INC.
04.2012 - 05.2015
Flux Cored Arc Welding / NCII -
Oz Assess And Training Center Inc.
Shielded Metal Arc Welding / NCII -
Oz Assess And Training Center Inc.
Molave Vocational Technical School -
Hotel and Restaurant Management -
Datamex Institute Of Computer Technology