Mark lewe Bajao

• Field installer for flow monitoring equipment for ou client councils all over New Zealand from North to South and east to west council
• Dunedin City Council flow monitoring project for a year in 2023 dealing with sub-contractors like traffic controls through email, managing the whole site while doing the installation as well
• Prepare and compile documents such as Design and drawing for piping in water networks, calculations and water flow diagrams
• Collection of data from various water network sites to measure and determine water, storm water, waste water, depths and velocity to determine overflow, backflow, in-flow or infiltration of the water network system
• Determining upstream flow, storm water and waste water across both treatment plant and networks
• Monitoring night time inflow isolation for wet and dry weather conditions
• Project management for investigation, installation and maintenance of water, storm water and waste water flow monitoring networks
• Reporting and data analysis of flow monitoring data captured by FSL
• Evaluate data, analyze graphical drawings and provide solutions for monitored water lines water piping networks
• Produce, investigate and provide reports on pumping station for council efficient operation and cost effectiveness studies for the purposes of budgetary controls
• Presenting technical data results for both technical and non-technical clients
• Support the General Manager and directors with in the business across the market
• Apply quality, environment and safety systems as well as maintain health and safety registers.
• Optimized construction processes by conducting regular site visits to monitor progress and ensure compliance with design specifications.

• Monitoring of trenching excavation, installation on Utilities infrastructure and making sure that the Auckland Council standards is to be followed
• Coordinate with the site supervisor or manager
• Responsible for emails, monitoring, inspection and weekly reporting
• Participate 100% of weekly safety meetings on site.
• Analyzed waterways to identify engineering problems and recommended corrective actions.
• Supported CIP projects and managed street and pavement projects.
• Reviewed calculations and analytical data to maintain accuracy of technical reports.
• Tested soils and materials to determine foundation strength.
• Reviewed and assisted in performing technical bid analysis.
• Supervised various municipal works and modernization projects and performed line and grade surveys.
• Performed construction observation and took soil samples.
• Drafted and reviewed construction schedules, environmental impact studies and project designs.
• Estimated materials costs and sourcing requirements for project feasibility.
• Identified and resolved potential structural issues.
• Solved complex engineering problems by applying advanced technical knowledge, ensuring projects remained on track.
• Conducted detailed site surveys to identify potential issues, leading to smoother project execution.
• Achieved recognition for outstanding project management, consistently delivering projects to highest standards.
• Improved project timelines by effectively coordinating with subcontractors and ensuring timely delivery of materials.
• Achieved significant cost savings by negotiating better rates with suppliers without compromising on quality.
• Conducted comprehensive quality assurance checks, ensuring all work met or exceeded project standards.
• Improved client satisfaction by providing regular updates and swiftly addressing any concerns or issues.
• Supported property condition assessment reports, 3D scanning and retro-commissioning throughout buildings.
• Created work schedules and adjusted as needed to meet project deadlines and keep shifts properly staffed.
• Managed on-site resources effectively, including personnel allocation, equipment utilization, and material storage to ensure smooth project progression with minimal downtime.
• Recorded daily events and activities in site diary to evaluate process and improve productivity.

Prepare and compile documents such as Design and drawing for piping in water networks, calculations and water flow diagrams

• Collection of data from various water network sites to measure and determine water, storm water, waste water, depths and velocity to determine overflow, backflow, in-flow or infiltration of the water network system
• Determining upstream flow, storm water and waste water across both treatment plant and networks
• Monitoring night time inflow isolation for wet and dry weather conditions
• Project management for investigation, installation and maintenance of water, storm water and waste water flow monitoring networks
• Reporting and data analysis of flow monitoring data captured by FSL
• Evaluate data, analyze graphical drawings and provide solutions for monitored water lines water piping networks
• Produce, investigate and provide reports on pumping station for council efficient operation and cost effectiveness studies for purposes of budgetary controls
• Presenting technical data results for both technical and non-technical clients
• Support the General Manager and directors with in business across the market
• Apply quality, environment and safety systems as well as maintain health and safety registers.
• Monitored, coached, and supervised teams.

• Monitoring Building maintenance of Government Hospital in area of responsibility through inspections and supervision of site
• Preparing for AutoCad plan, bill of quantities, manpower and equipment scheduling as part of project management
• Monitoring of provincial road period maintenance and rehabilitation through supervision and inspections
• Making progress and accomplishment report of ongoing provincial road rehabilitations project
• Lead a surveying team for resurvey existing road per municipality using Dumpy level, poles, measuring wheel, and Total station
• Help prepare survey data in Auto Cad
• Prepare detailed engineering drawing plans for new building projects
• And doing Structural designing using Staad Pro.
• Computed load and grade requirements, material stress factors and water flow rates to determine design specifications.
• Reviewed and assisted in performing technical bid analysis.
• Maintained compliance with regulatory requirements for water quality protection.
• Facilitated construction by mapping out utility installations and establishing reference points, grades and elevations.
• Assisted in bidding process by providing for on-site inspections and preparing take-offs.
• Interacted with state and local agencies concerning compliance with codes and regulations.
• Produced precise technical specifications and data sheets.
• Supervised various municipal works and modernization projects and performed line and grade surveys.
• Acted as contact for client's communication with field personnel.
• Reviewed calculations and analytical data to maintain accuracy of technical reports.
• Displayed strong communication and interpersonal skills while visiting clients, jobsites and consultant offices to support project and business development needs.
• Identified and resolved potential structural issues.
• Visited project sites during construction to monitor progress and consult with contractors and on-site engineers.
• Developed and implemented solutions to maintain and improve client infrastructure at existing sites.
• Developed blueprints and designs for existing structure remodeling projects.
• Computed resource quantities and requirements to give customers accurate price estimates.
• Performed routine training and attended special events to enhance job knowledge and skills.
• Analyzed data and used computer simulations to model and test design concepts.
• Managed quality assurance and laboratory testing for concreting operations.
• Conferred with engineering staff and other personnel to identify and resolve problems with design or implementation.
• Collaborated with civil technicians to gather project equipment and update maps, drawings, and blueprints.
• Monitored execution of contract work for compliance with design plans and specifications.
• Estimated quantities and material costs during project planning to support budgeting and costing.
• Reduced project costs through diligent budget management and cost-saving strategies.
• Instrumental in solving complex engineering problems through thorough analysis and creative thinking.
• Coordinate with regulatory agencies to secure permits and approvals for smooth project progression.
• Attended professional development courses staying current with industry trends and technological advancements.
• Developed comprehensive project schedules, coordinating resources to maintain timelines consistently.
• Maintained accurate records of construction activities ensuring documentation requirements were met at all times.
• Completed projects on time and within budget, closely monitoring progress and addressing issues promptly.
• Conducted site inspections to evaluate progress, identify discrepancies, and recommend corrective actions when necessary.
• Collaborated with architects, contractors, and clients for successful project execution and client satisfaction.
• Reviewed design documents for accuracy, providing feedback to improve overall project outcomes.
• Enhanced safety on construction sites by implementing strict adherence to safety protocols and guidelines.
• Improved project efficiency by streamlining communication between team members and stakeholders.

• Estimated quantities and material costs during project planning to support budgeting and costing.
• Monitored execution of contract work for compliance with design plans and specifications.
• Collaborated with civil technicians to gather project equipment and update maps, drawings, and blueprints.
• Reviewed calculations and analytical data to maintain accuracy of technical reports.

• Provided technical expertise throughout all phases of project, ensuring accurate execution of designs and specifications.
• Maintained records for each project and engineering discipline.
• Monitored installation of materials and equipment for compliance with drawings and specifications.
• Ensured quality control for all aspects of project, reducing defects and rework.
• Determined and scheduled priorities as required to progress engineering work.
• Managed budgets effectively for multiple projects, ensuring financial targets were met.
• Improved communication among stakeholders through regular updates and meetings.
• Negotiated contracts with suppliers to secure favorable terms and save costs.
• Trained new team members to apply best coding best practices and proper use of development tools.

• Delivered high-quality work on time and within budget, earning positive feedback from clients.
• Managed multiple projects simultaneously while maintaining strict adherence to deadlines and budgets.
• Coordinated timely delivery of materials and resources to job sites, preventing delays in project timelines.
• Kept site work safe and in line with budget, schedule, and applicable building codes.
• Implemented safety protocols on job sites, reducing incidents of workplace accidents and injuries.
• Hired and oversaw subcontractors to meet project needs.
• Created and managed project plans, timelines and budgets.
• Generated reports detailing findings and recommendations.
• Provided technical expertise throughout all phases of project, ensuring accurate execution of designs and specifications.
• Monitored installation of materials and equipment for compliance with drawings and specifications.
• Implemented quality control procedures, elevating standard of project deliverables.
• Implemented new strategies to reduce costs and improve efficiency of engineering team.

• Estimated quantities and material costs during project planning to support budgeting and costing.
• Monitored execution of contract work for compliance with design plans and specifications.
• Conducted detailed site investigations to identify potential issues and develop appropriate remediation strategies.
• Computed resource quantities and requirements to give customers accurate price estimates.
• Improved project safety records by developing and enforcing rigorous safety protocols.
• Reviewed calculations and analytical data to maintain accuracy of technical reports.
• Supervised various municipal works and modernization projects and performed line and grade surveys.
• Reviewed and assisted in performing technical bid analysis.