Professional with a solid grounding in fieldwork, ready to make an impact. Possess key skills in equipment maintenance, troubleshooting, and technical diagnostics. Experienced in CAD design, from small to large-scale projects, with a strong eye for detail and functionality. Committed to team collaboration and achieving results. Reliable, adaptable, and able to perform effectively under changing conditions and tight deadlines.
Hi, I’m
Martin Ayastuy
Tauranga
Summary
Overview
20
years of professional experience
Work History
Opal Kiwi Packaging
Field Technician
11.2021 - 07.2025
Job overview
- Conducted routine maintenance and repairs on packaging machinery to ensure optimal performance.
- Diagnosed equipment malfunctions and implemented effective solutions to minimize downtime.
- Assisted in installation and calibration of new packaging systems, enhancing operational efficiency.
- Collaborated with team members to troubleshoot technical issues and improve workflow processes.
- Trained new technicians on safety protocols and operational procedures for equipment use.
- Maintained accurate records of service activities and repairs performed on machinery.
- Participated in safety audits and contributed to a culture of compliance within the workplace.
- Communicated with supervisor to report progress, discuss issues and seek guidance.
- Minimized potential hazards through adherence to safety guidelines during all field assignments.
- Prioritized and managed multiple tasks and projects to meet deadlines and enhance customer satisfaction.
- Identified potential problems and prevented equipment failure through performing regular equipment inspections.
- Supported team members in addressing challenging technical issues, sharing expertise and knowledge when needed.
LRK Trays Ltd
Production Manager
07.2017 - 10.2021
Job overview
- Organized work to meet demanding production goals.
- Read and followed standard operating procedures.
- Evaluated incoming materials for quality and amounts ordered.
- Set and revised production schedules to meet changing demands.
- Kept work environments safe and efficient at all times.
- Established clear priorities and production quality standards.
- Oversaw the production process and managed the production schedule.
- Coordinated and supervised assembly work for couplers and rolling assembly crews.
- Kept work areas clean and neat.
- Supervised and motivated staff and management.
- Managed team performance by training, mentoring, disciplining and motivating employees.
- Made sure that products were produced on time and are of good quality.
- Assisted machine operators with finished pieces.
- Maintained quality assurance and customer satisfaction objectives.
- Maintained necessary level of communications between shifts.
- Responsible for the selection and maintenance of equipment.
- Set up and verified the functionality of safety equipment.
- Planned, scheduled and delegated daily work.
- Set and monitored product standards, examining samples of raw products and processing tests, to ensure the quality of all finished products.
- Calibrated machines to keep them running at peak performance.
- Monitored machine operation and diagnosed malfunctions.
- Level 3 Operator trained with SWF, IT CORRPAX, ECOPAX and BOIX machimery
- Supervised daily production operations to ensure efficient workflow and adherence to safety standards.
- Coordinated with team members to optimize production schedules and minimize downtime.
- Trained staff of direct labor employees to perform assembly and manufacture of specified products.
LRK Trays Ltd
Machine Operator
05.2015 - 07.2017
Job overview
- Organized work to meet demanding production goals.
- Set up and verified the functionality of safety equipment.
- Calibrated machines to keep them running at peak performance.
- Monitored machine operation and diagnosed malfunctions.
- Responsible for the selection and maintenance of equipment.
- Set and monitored product standards, examining samples of raw products and processing tests, to ensure the quality of all finished products.
- Tested products or subassemblies for functionality or quality.
- Performed preventative maintenance to maintain optimal productivity.
- Prepared and maintained production reports and personnel records.
- Kept work areas clean and neat.
Airconx (self employer)
Electrical Technician
12.2007 - 09.2014
Job overview
- Installed electrical and mechanical equipment in accordance with National Electric Code.
- Air conditioners, refrigeration units, Heat pumps
- Installed electrical conduit and wiring for power, controls and lighting.
- Updated and modified components and systems to improve operation.
- Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems.
- Determined proper methods, equipment and materials to complete cost repairs within budget.
- Operated and maintained electronic transmitting and receiving equipment, as well as digital and analog computers.
- Installed two-way radios in vehicles to facilitate communication between team members.
- Disconnected and removed motors and pumps.
- Documented all maintenance and repairs performed on equipment.
- Tested, troubleshot and calibrated equipment in the shop and in the field.
- Cleaned work sites, including hauling debris and trash, cleaning tools and storing equipment.
- Reported all unsafe activities, situations and potential hazards to my team in order to create a safe working atmosphere.
- Tested wiring and other system parts for electrical flow and function.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Controlled and monitored mechanical equipment using computer.
ConectWithYou
Electrical Apprentice
01.2006 - 01.2007
Job overview
- Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
- Handled installation of electrical components by splicing, joining and connecting wire.
- Repaired systems, replaced malfunctioning parts, and supported electrical installations.
- Used various measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps to complete installations and repairs.
- Trained laborers in basic electrical principles, tool management and site safety.
- Completed and checked wiring tasks through wall and floor conduits and holes accurately.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Education
Escuela Técnica Raggio (Technical High School)Buenos Aires, Argentina.
Electro-Mechanical Technician from Diagnostics, Wiring, Pneumatics Systems.
12.2006
University Overview
Electro-Mechanical Technician
Graduated as an Electro-Mechanical Technician with hands-on training in both electrical and mechanical systems. Skilled in the installation, maintenance, and repair of industrial equipment, motors, control panels, and wiring. Trained to read technical drawings, use diagnostic tools, and follow preventive maintenance procedures. Also taught how to work effectively in a team environment, with a strong focus on communication, safety, and collaboration. Experienced in troubleshooting and problem-solving in fast-paced industrial settings.
Skills
- Pro active Person
- Team leadership
- Extremely quick learner
- Materials management
- Conflict resolution
- Maintenance and repair
- Project management
- Self-motivated
- Schedule management
- Production procedures
- Process improvement
- Engineering/project management experience
- Interpersonal skills
- Staff management
- Production targets
Timeline
Field Technician
Opal Kiwi Packaging
11.2021 - 07.2025
Production Manager
LRK Trays Ltd
07.2017 - 10.2021
Machine Operator
LRK Trays Ltd
05.2015 - 07.2017
Electrical Technician
Airconx (self employer)
12.2007 - 09.2014
Electrical Apprentice
ConectWithYou
01.2006 - 01.2007
Escuela Técnica Raggio (Technical High School)
Electro-Mechanical Technician from Diagnostics, Wiring, Pneumatics Systems.
Similar Profiles
Kaylee Martini-HohaiaKaylee Martini-Hohaia
Machine Operator at Opal Kiwi PackagingMachine Operator at Opal Kiwi Packaging
Sreekandh RamakrishnannairSreekandh Ramakrishnannair
Machine Operator at Opal Kiwi PackagingMachine Operator at Opal Kiwi Packaging
Finoj FrancisFinoj Francis
Machine Operator at Opal Kiwi Packaging LimitedMachine Operator at Opal Kiwi Packaging Limited
Dave SwarbrickDave Swarbrick
Fabrication Lead at Chaytor CoFabrication Lead at Chaytor Co
Tyson PayneTyson Payne
Carpentry Apprentice at Brad Allen BuildersCarpentry Apprentice at Brad Allen Builders