Oelof Andre Kruger
Bay Of Plenty,Rotorua
Summary
I am a qualified Fitter and turner, with a Trade Certificate. Over 10 years’ experience as a fitter and turner in the maintenance field, and almost 9 years in mine rescue services. Perviously a CPTu Technician for 2 years, skilled in Piezocone testing piezometers, soil sampling, seismic & CSW. Currently a Process Control at Trility (water treatment) .My experience has mainly been in the mining industry. I am competent in maintaining heavy plant machinery and equipment through maintenance activities, troubleshooting and fault-finding. I work well under pressure, good communication & time management. Passionate, positive and committed to Health and safety. Working within a team or as an individual. I make sound judgment based on my knowledge and experiences. Other Proficiencies include, Competent Person A, Artisan Aide, Overhead Crane Maintenance ,Stockpile tunnel conveyor DE-dusting system ,Basic Rigging,C34-Drott(pick up & carry),Legal liability, Operational Risk Management, First aid 1,2basic firefighting ,Proto Certificate, Ropes Technician and CPTu Technician,Forklift licence,Truck loader crane licence,confined space and gas testing,mobile elevated work platform(EWPS & EWP),working at height advance.
I am known to form strong working relationships with technicians at all levels and display leadership through dedication
and delivering quality work. I am now seeking to further my career in New Zealand.
Overview
13
13
years of professional experience
Work History
SERVICE PERSON/FITTER AND TURNER
PALABORA COPPER MINING COMPANY LTD
Phalaborwa, South Africa
01.2011 - 01.2020
- Diagnose and test a hydraulic circuit
- Test the pump in the circuit
- Fit and set a pressure relief valve
- Control the speed of an actuator
- Inspect and maintain a jaw crusher
- Carry out daily inspections on a compressor
- Carry out three monthly inspections on a compressor
- Lift and move equipment
- Do lock-out procedure
- Set a drip feed lubricator
- Pack a Plummer block
- Operate a lathe
- Plan a turning work piece
- Operate oxy-acetylene cutting equipment
- Use welding equipment
- Overhaul a single stage centrifugal pump
- Control the speed of a double acting cylinder
- Set pressure sequence valves
- Do basic rigging
- Replace Pipes and water sprayers on a conveyor belt system
- Remove and replace bearings
- Remove, replace and line up a coupling
- Cut and fit gaskets
- Fit seals and packing
- Set tension and align V-belts
- Cut thread with stock and dies
- Drill and tap holes
- Operate a portable angle grinder
- Use a milling machine
- Overhaul Valves
- Remove and mount bearings
- Carry out daily inspection on crushers
- Maintain an automatic lubrication system
- Maintain and repair gate valves
- Maintain safety devices on a conveyor belt system
- Maintain and overhaul pumps
- Maintain a milling Machine
- Maintain a pedestal grinder
- Maintain a pedestal drill
- Maintain and align a chain drive
- Maintain a cone crusher
- Maintain valves
- Maintain a gearbox
- Maintain a water pipe system
- Maintain workshop machinery
- Maintain a lathe.
CPTu TECHNICIAN
OSIMO MONITORING
Gauteng, South Africa
01.2020 - 10.2022
- Cone Penetration test
- Seismic test
- Soil sample test (mostap)
- Telemetry Specialist Loggers, gateways
- Installation of Piezometers
- Maintenance and repairs of SCPTu
- Testing rig and hydraulics
- Daily data capture.
- Replaced defective components or parts as needed.
- Restored product condition using proven techniques.
- Inspected materials and equipment regularly to check for potential hazards and machine defects.
- Managed workflow and productivity of lower-level technicians to keep projects on task.
- Diagnosed problems using test equipment such as multimeters, oscilloscopes, signal generators, power supplies.
- Provided training sessions for junior technicians on proper use of test equipment and techniques for troubleshooting complex systems.
- Performed troubleshooting and repair of equipment in accordance with manufacturer specifications.
- Worked closely with engineering teams to develop solutions for difficult problems encountered during testing activities.
- Took measurements and evaluated dimensions of surrounding area to correctly install new machinery.
- Tested and calibrated instruments to ensure accuracy and reliability of data.
- Analyzed data collected during testing to determine root cause of failure.
- Utilized a variety of hand tools including soldering irons, screwdrivers, pliers, cutters, wire strippers and crimpers.
- Followed safety practices to safeguard against injury and damage to property.
- Adhered to applicable regulations, policies and procedures for health, safety and environmental compliance.
- Conducted preventive maintenance procedures according to established schedules.
- Routinely inspected equipment for preventive and emergency maintenance needs.
- Troubleshot systems and equipment and ran tests to make effective recommendations.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Leveraged [Software] skills to input and compile data gathered from various sources.
Maintenance Fitter
Claymark
Bay Of Plenty, Rotorua
11.2022 - 05.2024
- Replaced defective components in order to minimize downtime.
- Disassembled machinery to remove parts and make repairs.
- Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
- Operated hand and power tools to complete repairs.
- Operated equipment to cut, join, repair and fabricate components and equipment.
- Repaired worn or damaged machine parts using precision tools such as lathes, grinders, drill presses, saws.
- Fabricated new parts to repair broken material.
- Installed new systems, replacement parts and components to maintain proper operation.
- Performed routine maintenance and repairs on production machinery.
- Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
- Conducted preventative maintenance checks on a regular basis to ensure smooth operation of machines.
- Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
- Performed lubrication tasks such as oiling moving parts and greasing bearings.
- Operated hoists, cranes and other lifting devices to move heavy objects safely during repair jobs.
- Followed safety regulations while performing maintenance activities onsite or in the workshop environment.
- Fabricated parts from metal stock using welding techniques like MIG and TIG welding.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Completed day-to-day duties accurately and efficiently.
- Prioritized and organized tasks to efficiently accomplish service goals.
- Verified dimensions of finished workpieces, using measuring devices.
- Lubricated and clean machines with grease guns or solvents.
- Selected and installed saw blades according to established safety measures.
- Positioned guides, stops, holding blocks and other fixtures to secure and direct workpiece.
- Set up machinery by adjusting tension on blade guides, drive belts, pulleys.
- Used appropriate tools to carefully clear machine jams.
- Used hand tools to adjust bolts, clamps, stops and guides.
- Kept work areas clean, neat and free of safety hazards to maximize efficiency.
- Studied blueprints, templates, sample parts and specifications as guide for sawing operations.
- Threaded and installed pipe using pipe wrench and dies.
- Threaded pipes using specified machinery.
- Operated manual lathe machines to cut metal into specific shapes.
- Prepared work area for turning operations following procedures and specifications.
- De-burred and cleaned parts after jobs and performed inspections to locate concerns.
- Drilled and tapped holes for installation of studs.
- Fabricated custom components from raw materials using cutting tools such as saws, drills and mills.
- Repaired worn or damaged machine components according to blueprints or other specifications.
- Performed visual inspections on bearings for surface defects such as pitting, scoring, or spalling.
- Cleaned and calibrated dial indicators, fixed gauges, or height gauges prior to tests.
- Inspected bearing assemblies for conformity to industry standards and customer requirements.
- Ensured that all bearings met required tolerances and specifications before releasing them for final assembly.
- Operate cutting torch.
Process Controller
Trility
Bay Of Plenty, Rotorua
05.2023 - Current
- Ensured that all necessary permits were obtained prior to beginning work on any project.
- Maintained records of plant operation, including chemical dosages, flow rates, residuals, and other parameters.
- Operated sludge handling equipment such as centrifuges, thickeners, clarifiers, and belt press.
- Adhered strictly to applicable regulations governing wastewater discharge levels.
- Inspected water quality and levels and reported findings to supervisors.
- Responded to plant emergencies and equipment breakdowns by contacting appropriate supervisors and adhering to protocols.
- Repaired and maintained pumps, motors, blowers and other mechanical equipment used in the plant's operations.
- Collaborated with engineering staff on design modifications aimed at improving operational efficiency.
- Performed housekeeping duties to keep facilities clean and neat.
- Managed inventory of chemicals used in the water treatment process.
- Prepared records of plant operations, material quantities and laboratory test results.
- Used SCADA system to maintain appropriate levels.
- Added chemicals to disinfect and deodorize water and other liquids.
- Collected and sent water samples to health labs for review.
- Assisted in safe unloading and storage of chemicals.
- Directed and coordinated plant workers engaged in routine operations and maintenance activities.
- Refilled and replaced chemical containers to prevent shortages and delays.
- Collected and tested water and sewage samples using test equipment and color analysis standards.
- Monitored chemical feed pumps to verify proper chemical dosage in treated water.
- Investigated customer complaints odor and overfows,
- Recorded operational data, personnel attendance or meter and gauge readings on specified forms.
- Monitored and adjusted water treatment plant operations in accordance with established procedures.
- Inspected tanks and pipes for signs of corrosion or malfunctioning equipment.
- Calibrated pumps and valves to regulate the flow of chemicals into the water supply system.
- Maintained, repaired and lubricated equipment.
- Collected samples to assess water quality and tested for pH, hardness and sediment levels.
- Used forklifts, pumping equipment and air compressors frequently.
- Performed laboratory tests on raw and treated water samples to ensure adherence to safety standards.
- Assisted with sewer line installations and inspections.
- Conducted weekly inspections of all equipment used in the water treatment process.
- Inspected equipment or monitored operating conditions, meters, and gauges to determine load requirements and detect malfunctions.
- Implemented safety protocols to ensure a safe working environment at all times.
- Performed grounds and equipment maintenance to keep facility running smoothly.
- Displayed strong telephone etiquette, effectively handling difficult calls.
- Leveraged [Software] skills to input and compile data gathered from various sources.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Achieved cost-savings by developing functional solutions to problems.
- Maintained schedule of class assignments to meet deadlines.
- Completed day-to-day duties accurately and efficiently.
- Understood and followed oral and written directions.
- Provided excellent service and attention to customers when face-to-face or through phone conversations.
Education
Level 2 - First Aid
St John
11-2023
Level 1 - First Aid
St John
Rotorua10-2023
Forklift Operators Certificate
Workplace Safety Solutions Ltd
Rotorua10-2023
Confined Space And Gas Testing
Vertical Horizonz
Rotorua09-2023
Mobile Elevated Work Platform EWPS & EWP
Vertical Horizonz
Rotorua09-2023
Working At Height Advanced
Vertical Horizonz
Rotorua09-2023
Truck Loader Crane Licence
Vertical Horizonz
Tauranga08-2023
Operational Risk Management Process -
Anglo American
01.2022
Basic Fire Fighting -
First Aid Training SA
01.2021
CBT Legal Liability MHSA -
Health & Wealth Sector Education Training Auth
01.2021
TrilityTrilityPiezoconeCertificate of Competence CPTu -
Osimo
01.2021
Fitter and Turner (Trade Test) RED SEAL -
Quality Council for Trade & Occupation
01.2020
Overhead Crane Maintenance Certificate -
Palabora Mining Company Limited
01.2018
National Diploma N2 - Engineering Studies -
Department: Higher Education and Training Republic of South Africa
01.2017
Artisan Aide: Fitting Including Machinery (RED SEAL) -
Mining Qualifications Authority
01.2015
Competent Person A (RED SEAL) -
Mining Qualifications Authority
01.2015
C34-DROTT (PICK UP & CARRY) CERTIFICATE -
Palabora Mining Company Limited
01.2013
Mine Rescue Certificate -
Mining Qualifications Authority
01.2013
Rope Technician -
Mining Qualifications Authority
01.2013
Stockpile Tunnel Conveyor Dedusting System -
Howden Projects
01.2012
Basic Rigging Course Certificate -
Palabora Mining Company Limited
01.2011
Skills
- Equipment Testing
- Material Prepping
- Piping Specifications
- Building Code Regulations
- Job Order Prioritization
- Materials Ordering
- Blueprint Reading
- Machinery Operation
- Welding
- Parts Fabrication
- Hand and Power Tools
- Hydraulics
- System Maintenance
- Project Planning
- Site Cleaning and Organization
- Attention to Detail
- Installation and Finishing
- Job Site Setup
- Task Prioritization
- Soil Classification
- Record Digitizing
- Equipment Assembly
- Documentation and Reporting
- Equipment Troubleshooting
- Data Transcription
- Core Sampling Procedures
- Log Updating
- Technical Report Writing
- Seismic Analysis
- Equipment Repair
- Sample Collection
- Sample Testing
- Field Testing
- System Monitoring
- SCADA Operations Knowledge
- Adjusting Chemical Levels
- Chemical Handling
- Report Writing
- Documentation Skills
- Preventive Maintenance
- Controls Management
- Equipment Inspection
References
- Stuart Thompson ,Palabora Mining Company,stuart.thompson@palabora.co.za,+27 82 885 0903(south Africa)
- Albert Kruger,Osimo Monitoring, akruger@geotechnics.co.nz,+64 29 129 2679
- Chris Bouwer, Claymark,chrisoffel.s.bouwer@gmail.com, +64 29 127 0275
- Johnny Spencer,Trility,jonothan.spence@trility.co.nz,+64 27 548 4897
Timeline
Process Controller
Trility
05.2023 - Current
Maintenance Fitter
Claymark
11.2022 - 05.2024
CPTu TECHNICIAN
OSIMO MONITORING
01.2020 - 10.2022
SERVICE PERSON/FITTER AND TURNER
PALABORA COPPER MINING COMPANY LTD
01.2011 - 01.2020
Level 2 - First Aid
St John
Level 1 - First Aid
St John
Forklift Operators Certificate
Workplace Safety Solutions Ltd
Confined Space And Gas Testing
Vertical Horizonz
Mobile Elevated Work Platform EWPS & EWP
Vertical Horizonz
Working At Height Advanced
Vertical Horizonz
Truck Loader Crane Licence
Vertical Horizonz
Operational Risk Management Process -
Anglo American
Basic Fire Fighting -
First Aid Training SA
CBT Legal Liability MHSA -
Health & Wealth Sector Education Training Auth
TrilityTrilityPiezoconeCertificate of Competence CPTu -
Osimo
Fitter and Turner (Trade Test) RED SEAL -
Quality Council for Trade & Occupation
Overhead Crane Maintenance Certificate -
Palabora Mining Company Limited
National Diploma N2 - Engineering Studies -
Department: Higher Education and Training Republic of South Africa
Artisan Aide: Fitting Including Machinery (RED SEAL) -
Mining Qualifications Authority
Competent Person A (RED SEAL) -
Mining Qualifications Authority
C34-DROTT (PICK UP & CARRY) CERTIFICATE -
Palabora Mining Company Limited
Mine Rescue Certificate -
Mining Qualifications Authority
Rope Technician -
Mining Qualifications Authority
Stockpile Tunnel Conveyor Dedusting System -
Howden Projects
Basic Rigging Course Certificate -
Palabora Mining Company Limited
Similar Profiles
Nakisani Jacqueline MudimeliNakisani Jacqueline Mudimeli
Metallurgical and Materials Engineering Intern at Palabora Mining CompanyMetallurgical and Materials Engineering Intern at Palabora Mining Company
Nosipho MaphumuloNosipho Maphumulo
Shift Electrician at Palabora Mining CompanyShift Electrician at Palabora Mining Company
William MasingiWilliam Masingi
TMM Engineer (Plant, Dams and Workshops) at Palabora Mining CompanyTMM Engineer (Plant, Dams and Workshops) at Palabora Mining Company