RAJESH SOMAIYA
Lower Hutt,WGN
Summary
Results-driven HVAC and Electrical Professional experienced in system installation, maintenance, and troubleshooting. Delivered reliable and efficient service through strong leadership and technical expertise, enhancing system performance and customer satisfaction. Committed to quality workmanship and safety standards while mentoring apprentices and managing diverse project teams.
Overview
2
2
Languages
1
1
Certification
24
24
years of professional experience
Work History
HVAC Contractor
Advanced Building Services Limited
Wellington, WGN
07.2021 - Current
- Installed wiring, panels, and circuit components for residential and commercial electrical systems.
- Interpreted blueprints, schematics, and code requirements to complete precise electrical layouts.
- Coordinated project schedules, material needs, and subcontractor activity across active job sites.
- Inspected work for compliance with electrical codes, safety standards, and permit requirements.
- Supervised apprentices and crews, providing guidance on installation methods and jobsite safety.
- Repaired, replaced, and upgraded electrical components to improve reliability and system performance.
- Troubleshot diverse types of electrical malfunctions using advanced diagnostic tools to isolate the root causes efficiently.
- Increased customer satisfaction by providing efficient and quality electrical services.
- Provided technical guidance to employees on safe operation of equipment and tools.
- Prioritized and distributed work assignments, selecting employees by strength in skills required for each task.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Examined electrical units for loose connections and broken insulation.
- Followed state and local building regulations based on the National Electrical Code.
HVAC Technician
CAPITAL BUILDING SERVICES LIMITED
Lower Hutt, WGN
01.2016 - 06.2021
- Performed preventive maintenance on chillers, boilers, air handlers, and rooftop units.
- Diagnosed HVAC equipment faults and restored heating, cooling, and ventilation systems.
- Repaired motors, belts, thermostats, and refrigerant components to maintain system reliability.
- Inspected work orders and prioritized service calls to support tenant comfort needs.
- Monitored control systems and adjusted settings for efficient building temperature regulation.
- Documented maintenance activities and identified recurring issues for corrective action.
- Collaborated with building operations teams to coordinate repairs and minimize downtime.
- Followed safety procedures and regulatory standards during all HVAC service tasks.
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Installed new heating, ventilation, and air conditioning systems in residential and commercial buildings with precision and attention to detail.
- Conducted maintenance service on HVAC systems to increase life expectancy of equipment and prevent costly repair work.
- Repaired and replaced motors, bearings and belts.
- Performed comprehensive preventive maintenance on various types of HVAC equipment, prolonging their lifespan.
- Enhanced customer satisfaction by providing prompt and professional service for all HVAC-related issues.
- Filled out detailed work orders for each job completed.
- Traveled to job sites for both scheduled and emergency appointments.
- Provided emergency response services for critical system failures, minimizing downtime impacts on businesses or homeowners.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Maintained boilers, hot water systems, gas heating equipment and food service equipment.
- Served as a mentor to junior technicians, providing guidance on best practices for troubleshooting and repairing various types of HVAC equipment.
- Collaborated with project managers to ensure timely completion of large-scale HVAC installations.
- Coordinated with suppliers to secure best prices on high-quality HVAC parts and materials.
- Collaborated with construction teams to ensure seamless integration of HVAC systems in new builds.
- Conducted detailed diagnostics to identify and fix complex HVAC system faults, improving operational reliability.
- Reduced downtime, performed emergency repairs on critical HVAC systems.
- Completed thorough inspections of supporting electrical systems to assess continuity and locate faults.
Electrician
Command Building Services
Lower Hutt, WGN
06.2012 - 12.2015
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Maintained compliance with local codes and regulations by staying up-to-date on industry standards and best practices.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Mentored junior electricians on proper wiring methods, safety practices, and jobsite readiness.
- Maintained Hvac electrical equipment for commercial sites.
- Increased productivity by effectively managing multiple projects simultaneously while maintaining high-quality workmanship.
- Fault-find/Troubleshoot commercial HVAC plants, MCC switchboards and equipment to maximize correct operations.
- Enhanced quality control by inspecting the condition of equipment and tools.
- Boosted operational efficiency in commercial buildings, implementing energy-saving solutions and automated systems.
Electrician
NME Group
Lower Hutt, WGN
04.2009 - 05.2012
- Installed wiring, conduit, and electrical components for residential and commercial systems.
- Diagnosed circuit faults and repaired equipment to restore safe, reliable operation.
- Interpreted blueprints, schematics, and technical drawings for accurate electrical layouts.
- Tested voltage, continuity, and insulation using multimeters and specialized diagnostic tools.
- Performed preventive maintenance on panels, breakers, motors, and control systems.
- Ensured compliance with electrical codes, safety standards, and lockout/tagout procedures.
- Coordinated with contractors and site teams to complete installations and troubleshoot issues.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Performed routine and complex maintenance and repairs on various electrical equipment.
- Stored and maintained power tools and equipment for each job.
- Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
- Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
- Inspected worksites and installations to verify compliance with state safety codes.
- Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
- Developed strong working relationships with clients through consistent professionalism, reliability, and transparency during projects.
Electrician
Lautoka Electric Services
Suva, FIJI
01.2003 - 12.2008
- Installed wiring, conduit, and electrical components for residential and commercial systems.
- Diagnosed circuit faults and repaired equipment to restore safe, reliable operation.
- Interpreted blueprints, schematics, and technical drawings for accurate electrical layouts.
- Tested voltage, continuity, and insulation using multimeters and specialized diagnostic tools.
- Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
- Stored and maintained power tools and equipment for each job.
- Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
- Achieved client satisfaction by prioritizing open communication throughout project stages.
- Studied building schematics to determine location of wiring and equipment.
- Examined electrical units for loose connections and broken insulation.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Troubleshot and repaired malfunctioning systems and components.
- Achieved significant cost savings for projects, carefully selecting materials and optimizing resource allocation.
- Reduced electrical waste and improved sustainability by advising clients on green energy options and practices.
Education
Diploma - Electrical Engineering
Fiji National University
Samabula Campus, Suva12-2006
Skills
- HVAC system design systems
- Air conditioning
- Air distribution systems
- Thermal system efficiency maintenance
- Electrical system integration
- Equipment installation techniques
- Control system diagnostics
- Regulatory compliance knowledge
- Control systems
- HVAC system installation
- Technical troubleshooting methods
- System upgrade procedures
- Equipment maintenance practices
- Commercial HVAC installation
- Building automation integration
- HVAC system installation
- Problem-solving techniques
Accomplishments
- Supervised a team of 5 workers during the complete installation of commercial HVAC ducting and equipment.
- Resolved product issue through consumer testing.
- Supervised team of 5 staff members.
Affiliations
- Institute of Electrical and Electronics Engineers
Certification
- Licensed electrician - september 2011
- Electrician License - since 2011
Languages
English
Professional Working
Hindi
Full Professional
Interests
- Horseback Riding
- I like working with my hands and fixing things
- Documenting and sharing travel experiences
- I enjoy helping others and giving back to the community
- DIY and Home Improvement
- Cooking
- Gardening
- High-Intensity Interval Training
- Rock Climbing
- Outdoor Recreation
- Music
- Watching Movies and TV Shows
- Gym Workouts
- Camping
- Swimming
- Playing Sports
- Team Sports
- Running
- Road Trips
Timeline
HVAC Contractor
Advanced Building Services Limited
07.2021 - Current
HVAC Technician
CAPITAL BUILDING SERVICES LIMITED
01.2016 - 06.2021
Electrician
Command Building Services
06.2012 - 12.2015
Electrician
NME Group
04.2009 - 05.2012
Electrician
Lautoka Electric Services
01.2003 - 12.2008
Diploma - Electrical Engineering
Fiji National University