ROBERTO DESOLOC CARREON
Flatbush,Auckland
Summary
Experience Steel Skilled Steel Fixer with experience in construction and civil engineering projects. Strengths include interpreting blueprints, cutting and bending steel bars or mesh, and ensuring structures are properly reinforced. Demonstrated capability to adhere to strict safety protocols while maintaining high-quality workmanship. Proven impact on project efficiency through diligent task completion.
Overview
29
29
years of professional experience
1
1
Certification
Work History
Pre Cast
Hynds Pipe Limited
Pokeno, Auckland
02.2020 - Current
- Organized trade shows and other events to promote products or services in the region.
- Read and interpret blueprints to determine dimensions of finished product.
- Fabricate precast concrete components using molds, vibrators, and other tools.
- Check the quality of each component before it is sent for installation.
- Perform regular maintenance on molds, vibrators, and other equipment used in fabricating precast concrete components.
- Clean up work area after completion of fabrication tasks.
- Inspect completed products for surface defects or flaws prior to shipment or installation.
- Record details such as batch numbers, weights, dimensions and production times into a logbook.
- Transport fabricated precast components from the production area to designated storage areas using forklifts or overhead cranes.
- Ensure that safety regulations are adhered to at all times while operating machinery or handling hazardous materials.
- Monitor and adjust settings on machines such as mixers and vibrators to ensure that they are functioning properly.
- Maintain accurate records of all materials used in fabrication processes.
- Positioned wire mesh and rebar to reinforce concrete.
- Calculated concrete quantities needed for jobs.
Steel Fixer
EXTRASTAFF
East Tamaki, New Zealand
07.2017 - 02.2020
- Rebar Fixing and Installation
- Preparing of Rebar and any kind of Rebar works/slab and Beam
- Also working of ply over rebar installation and precast beam and columns
- For Rebar work foundation and slabs and Column for foundation
- Steel fabrication (link, main bar, rebar)
- Rebar Cutting and Bending
- Connect Columns, Beams, Footings and Girders
- Position and fix reinforcements ready for concrete pouring
- Prepare the concrete, mixing sand, cement and water
- Pour concrete in the concrete form
- Maintain a safe and clean environment
- Reads plans and drawing for Rebar assembly fabrication, bending and cutting
- Installs and repairs steel structures
- Installing beams and Pre- cast Slabs
- Fitting spacers and chair (Support)
- Setting out the work area following engineering plans
- Make sure all pieces are fitted properly and complete repairs as necessary
Steel Fixer
DAEWOO E & C CO., LTD.
Jijel, Algeria
01.2016 - 03.2017
- Rebar Fixing and Installation
- Preparing of Rebar and any kind of Rebar works/slab and Beam
- Also working of ply over rebar installation and precast beam and columns
- For Rebar work foundation and slabs and Column for foundation
- Steel fabrication (link, main bar, rebar)
- Rebar Cutting and Bending
- Connect Columns, Beams, Footings and Girders
- Position and fix reinforcements ready for concrete pouring
- Prepare the concrete, mixing sand, cement and water
- Pour concrete in the concrete form
- Maintain a safe and clean environment
- Reads plans and drawing for Rebar assembly fabrication, bending and cutting
- Installs and repairs steel structures
- Installing beams and Pre- cast Slabs
- Fitting spacers and chair (Support)
- Setting out the work area following engineering plans
- Make sure all pieces are fitted properly and complete repairs as necessary
Steel Fixer
HYUNDAI E & C CO., LTD.
Abu Dhabi, United Arab Emirates
08.2013 - 08.2014
- Steel Fixing
- Place blocks under rebar to hold the bars off the deck when reinforcing floors
- Bend steel rods with hand tools or rod bending machine
- Position and secure steel bars, rods, cable or mesh in concrete forms using fastener, rod-bending machines, blowtorches, and hand tools
- Space and fasten together rods in forms according to blueprints, using wire and pliers
- Place blocks under rebar to hold the bars off the deck when reinforcing floors
- Cut and fit wire mesh or fabric, using hooked rods and position fabric or mesh in concrete to reinforce concrete
- Cut rods to required lengths, using metal shears, hacksaws, bar cutters
- Fitting spacers, fixing the formwork and shuttering used to hold settling concrete in place, joining cages and sections, fixing steel to concrete bases
- Installing beams and pre-cast slabs
- Installing of top and bottom rebar on eye beam
- Performing other duties as directed
Steel Fixer
GUSAN CONSTRUCTION (MALAYSIA) SDN. BHD
Sabah, Malaysia
12.2011 - 12.2012
- Build and install iron or steel girders, columns, and other construction materials to form buildings, bridges, and other structures
- Cut, position, and bolt down steel bars to reinforce concrete
- Erect steel frames
- Connect steel columns, beams, and girders
- Drill holes into steel for bolts
- Position steel with connecting bars and spud wrenches
- Work with drift pins to align the holes in the steel with the framework holes
- Bolt or weld pieces into place
- Set reinforcing bars into forms to hold concrete
- Fasten bars together with wire
- Place spacers under rebar to lift bars off deck
- Cut bars with metal shears and torches
- Reinforce concrete with welded wire fabric
- Substitute cables for rebar
- Tighten cables with jacking equipment
- Install stairs, handrails, or curtain walls
- Make sure all pieces are fitted properly and complete repairs as necessary
Steel Fixer
KAJIMA CORPORATION
Oran, Algeria
04.2008 - 10.2009
- Listen to the instruction given by foreman
- Prepare all tools and materials or machine before working
- Fabricate steel reinforcement such as beams, footing pads or special units and join fabricated units together for large sections of high rise or civil project and position the reinforcement ready for concrete pours
- Make steel bars or mesh the required length by cutting them with bolt cutters or power saw
- Obey and follow the instruction of my superior
- Tying rebar (reinforcement bars) together with wire, clips or welds to build up cages or section
- Fitting spacers and chair (support)
- Fixing the formwork and shuttering used to hold setting concrete in place
- Joining cages and sections
- Fixing steel to concrete bases
- Installing beams and pre-cast slabs
Steel Fixer
TEYSEER CONTRACTING CO. W.L.L.
Doha, Qatar
05.2005 - 01.2006
- Fixing steel to concrete bases
- Installing beams and pre-cast slabs
- Steel fixers fit and secure the steel bars and mesh used to reinforce concrete on construction using hand and power tools to cut bend bars or mesh
- Tying rebar (reinforcement bars) together with wire, clips or welds to build up cages or sections
- Bend the steel bars according to the given angle through the use of bending machine
- Be sure to cut the steel bars, wires with the correct measurement to avoid waste materials
- Tie the steel bars tightly and correctly to avoid disposition
- Be sure to use meter stick for accuracy measurement
Steel Fixer
MOGANTI/ AICI JV
Doha, Qatar
07.2004 - 05.2005
- Steelman determine the size, shape quantity and location of concrete reinforcing metal according to drawings or verbal instructions, measure, cut, bend and fit welded wire mesh into concrete areas to be mesh-oriented
- Operate cutting and bending machine
- Assemble steel bars and to make columns, footings, beams and mattings
- Make steel bars or mesh the required length by cutting them with bolt cutters, or power saw
- Assemble the reinforcing bars or mesh by welding, wiring or clipping into predetermined locations within the concrete
- Fabricate steel reinforcement such as beams, footing pads or special units, join prefabricated units together for large sections of high rise or civil project, and position the reinforcement ready for concrete pours
- Cut the needed materials according to their length and specifications
- Assemble column footing and beams associated with anchored dowels and beams
Steel Fixer
CONSOLIDATED CONTRACTORS INTERNATIONAL CO.
Doha, Qatar
04.2002 - 04.2003
- Listen to the instruction given by foreman
- Prepare all tools and materials or machine before working
- Fabricate steel reinforcement such as beams, footing pads or special units and join fabricated units together for large sections of high rise or civil project and position the reinforcement ready for concrete pours
- Make steel bars or mesh the required length by cutting them with bolt cutters or power saw
- Obey and follow the instruction of my superior
- Tying rebar (reinforcement bars) together with wire, clips or welds to build up cages or section
- Fitting spacers and chair (support)
- Fixing the formwork and shuttering used to hold setting concrete in place
- Joining cages and sections
- Fixing steel to concrete bases
- Installing beams and pre-cast slabs
Steel Fixer
DMCI COMSUNJI, INC.
Makati City, Philippines
02.1996 - 02.1997
- Building installation wall and elevators on high rise
- Rebar Fixing and Installation
- Preparing of rebar and any kind of rebar works/ slab and beams
- Also working of ply over rebar installation, pre-cast beam and column
- For rebar works foundation and slabs and column for foundation
- Steel fabrication (links, main bar, rebar) Rebar cutting and bending
- Connect columns, beams, footings and girders
- Position and fix reinforcements ready for concrete pour
- Pour concrete in the concrete form
- Maintain a safe and clean environment
Education
Concrete Product Manufacture
BCITO
New Zealand01-2024
High School -
Arellano University
Pasay01.1993
Elementary -
Tambo Unit 1 Elementary School
Parañaque City01.1989
Skills
- Reading Plans
- Steel Fixing Expertise
- Attention to details
- Ability to work under pressure
- Safety Compliance
- Perform Formwork and rebar tying
- Machine operator
Languagespeech
- Filipino
- English
Contactperson
Ritchie C. Carreon, 0224978116
Passportnumber
EC3610329
Dateissued
03/07/15
Dateofexpiration
03/06/20
Placeofbirth
Manila, Philippines
Personal Information
- Age: 41
- Citizenship: Filipino
- Date of Birth: 08/10/76
- Gender: Male
- Marital Status: Married
Certification
- NZQCF/ BCITO
Timeline
Pre Cast
Hynds Pipe Limited
02.2020 - Current
Steel Fixer
EXTRASTAFF
07.2017 - 02.2020
Steel Fixer
DAEWOO E & C CO., LTD.
01.2016 - 03.2017
Steel Fixer
HYUNDAI E & C CO., LTD.
08.2013 - 08.2014
Steel Fixer
GUSAN CONSTRUCTION (MALAYSIA) SDN. BHD
12.2011 - 12.2012
Steel Fixer
KAJIMA CORPORATION
04.2008 - 10.2009
Steel Fixer
TEYSEER CONTRACTING CO. W.L.L.
05.2005 - 01.2006
Steel Fixer
MOGANTI/ AICI JV
07.2004 - 05.2005
Steel Fixer
CONSOLIDATED CONTRACTORS INTERNATIONAL CO.
04.2002 - 04.2003
Steel Fixer
DMCI COMSUNJI, INC.
02.1996 - 02.1997
- NZQCF/ BCITO
Concrete Product Manufacture
BCITO
High School -
Arellano University
Elementary -
Tambo Unit 1 Elementary School
Similar Profiles
Matthew FinnMatthew Finn
Customer Service at Hynds Pipe Systems LimitedCustomer Service at Hynds Pipe Systems Limited
Edwin Hauturu MckinnonEdwin Hauturu Mckinnon
Health, Safety and Environmental Advisor at Hynds Pipe SystemsHealth, Safety and Environmental Advisor at Hynds Pipe Systems
Graeme DuncanGraeme Duncan
Senior Customer Service Representative at Hynds Pipe SystemsSenior Customer Service Representative at Hynds Pipe Systems