Sean Kieran Goodwin
One Tree Point
Summary
Personal Profile
I am a self-motivated, reliable and hard working individual who is looking for challenging role where I have the
opportunity to put my excellent mechanical aptitude and problem solving skills to good use.
I am able to relate well to others at all levels and have the ability to work autonomously and as part of a team. I
have experience working night shift and FIFO and ensure that I am flexible when it comes to location and rosters.
Safety is my number one priority and I ensure that all jobs are thoroughly assessed before work is commenced.
I have worked in industries such as Oil & Gas Construction, Quarantine, Gold Mining, Equipment Hire (including
Overview
23
23
years of professional experience
Work History
Driver, APPRENTICE MECHANICAL FITTER
BDX GROUP, WHANGAREI
04.2022 - Current
- EWP), Heavy Diesel Fitting and more
- Licences & Certificates
- New Zealand, Licence with W, T, R, F endorsements | 28/07/2004 | NZTA
- Enrolled in General Engineering Adult Apprenticeship | 07/2022 | Competenz
- Permit Receiver | 24/07/2022 | NZQA Unit 17588
- Work Safely at Heights | 04/07/2022 | Safety N’ Action
- Confined Space and Gas Detection | 02/09/2022 | Safety N’ Action
- Cert III in Process Plant Operations | 01/02/2019 | ASG Group
- Construction White Card | 09/04/2013 | Worksafe WA
- High Risk Licence – LF & WP Classes | 30/11/2012 | Worksafe WA
- MARCSTA – Work Health and Safety Induction | 18/10/2012 | MARCSTA, Operating Commercial Vehicle | 28/04/2014 | Test and Training Australia
- Triple Course - Fire Extinguisher, Manual Handling & Spill Response | 04/06/2013 | CKJV
- Spotter / Traffic Management Training | 21/06/2013 | CKJV
- Hazard Risk Management | 31/05/2013 | Chevron / CKJV E-Learning
- Hazard Communication Course | 29/05/2013 | CKJV
- Introduction to Permit to Work | 31/05/2013 | Chevron / CKJV E-Learning
- Working in Accordance with Issued Permits | 31/05/2013 | Chevron / CKJV E-Learning
- Monitoring & Controlling Issued Permits | 31/05/2013 | Chevron / CKJV E-Learning
- Demonstrated Skills & Abilities
- Strong leadership skills with the ability to direct and supervise staff
- Experience in identifying and managing risks
- Strong understanding of Occupational Health & Safety standards within Oil & Gas and Hire Industries
- Good understanding of mechanical equipment operations and maintenance / servicing
- Experience completing job cards, JHA’s, 5x5’s and various important documentation
- High level of attention to detail and strong work ethic
- Highly experienced in all aspects of EWP operations within the Oil & Gas and Hire Industries, Workshop based Fabrication
- Interpretation of Engineering Drawings/Plans
- Mig Welding and Oxy Cutting
- Use of various workshop equipment i.e
- Gantry, Cropper, Bandsaw, Guillotine, Drill Press etc
- Subcontract Project work: o Company: Kleensafe - Channel Infrastructure Position: Operator of Automated Oil Tank Cleaning System (current) 10-13 hour days & nightshift on a 6:1 roster Mobilising/demobilising equipment for each tank, which includes plumbing pipework and pumps to the separation unit
- Problem Solving to find solutions to various faults and issues
- Permit Receiver for all Kleensafe works Operate Oil Separation Unit Confined space entry o
RAIL PROTECTION OFFICER
KIWIRAIL NEW ZEALAND
01.2021 - 02.2022
- Obtain and implement protection for employees and contractors wanting to enter the rail corridor
- Run Daily Safety Briefing Meeting
- Obtain Track Warrants from Train Control
- Erect Site Limit Boards at distances specified by Rail Protection Officer
- Communicate with Personnel via Radio using correct radio protocol
- Protect the safety of all Track Workers by monitoring rail movements and location of workers at all times
- Adhere to rail specific processes and procedures, including locking on and off and Scripted Radio requests
- Daily long distance travel to various sites around Northland
- 10-12 hour days and weekend work as rostered
- RELOCATED
SERVICE TECHNICIAN
LANCER WORLDWIDE
BRISBANE, QLD
08.2017 - 05.2020
- Installation and maintenance of beer systems
- Attend service call outs to diagnose and repair faults
- Installation and compliance testing of Co2 monitoring systems
- Delivery and onsite set up of mobile bars
- Adhere to site specific Health & Safety rules as per inductions
- Attend inductions for various job sites
- Monitor stock levels and conduct regular stocktakes of service vehicle
- Travel to various locations as necessary, including overnight stays
- Attend to nationwide On Call duties (24hrs)
- Complete job card and provide detailed notes on tablet for invoicing
MECHANICAL TRADE ASSISTANT
CB&I CONSTRUCTORS
BARROW ISLAND, WA
06.2014 - 06.2016
- Set up Tooling, check calibration of tooling (micrometers, torque wrenches, hydraulic tensioner pumps, lasers etc) for sign off of tasks listed below
- Assist with GE Frame 9 Gas Turbine Generator, GE MR/PR multistage centrifugal compressors, Peroni Pompe
- Reciprocating Meg Injection Pumps, preliminary and final alignment
- Assist with D4R7S/D6R4B Dresser Rand alignment and dry gas seal installation
- Assist with Gland Packing on Peroni Pompe Reciprocating Meg Injection Pumps
- Assist with Siemens STC Compressor alignment and dry gas seal installation
- Assist with Installation and alignment of Air cooled Heat Exchangers
- Use E710 Laser for Rotating Equipment alignments
- Assist with Vessel internals installation and sign off
- Assist with module setting and alignments
- Work with Petrol Valve Vendor with removal and reinstatement of Stem Nuts for Gate Valves
- Assist with Removal of and Reinstatement of Valves and Spools using Hydraulic Tensioners
- Assist with Coupling Installs
- Assist with removal and installation of PSV’s and control valves
MECHANICAL TRADE ASSISTANT
CB&I CONSTRUCTORS
HENDERSON, WA
04.2014 - 05.2014
- General warehousing duties
- Forklift operations (2.5T – 16T)
- Load restraint — container & flat racks
- Routine site quarantine checks
- Tagging’ and completion of quarantine documentation — containers & flat racks
- Adhere to Site Health & Safety regulations
- Traffic management
TECHNICAL ASSISTANT / TEAM LEADER
CTI LOGISTICS
HENDERSON, WA
04.2013 - 04.2014
- Check equipment for contamination
- Clean, wrap and bring equipment up to ‘red tag’ standard for Barrow Island
- Organise and take out permits
- Operate and spot EWP’s
- Complete Job Cards daily
- Work closely with CKJV Assistant Construction
- Manager to organise daily Work Front
- Assist CKJV staff with Trade Assistant Duties
- Travel to different sites as required
- Adhere to site Health & Safety regulations
FIRE ASSAY | AUSTRALIAN LABORATORY SERVICES, ALS
KALGOORLIE, WA
12.2012 - 03.2013
- Weigh and prepare gold samples
- Mix lead flux with gold samples
- Pour gold samples into moulds from furnace
- Remove lead button from glass moulds
- Perform cupellation process
- Reconcile samples against documentation
- Transfer gold samples into test tubes for Lab
- Assistants
- Maintain Fire Assay equipment and work area
- Adhere to company Health & Safety policies
ASSISTANT BRANCH MANAGER
HIREQUIP
AUCKLAND, NZ
01.2009 - 10.2012
- Staff management
- Run branch meetings
- Reporting – On hire, Off hire and expenditure
- End of month invoicing
- VPT Project management (Fletchers Construction)
- Forklift Operation
- All duties as per Customer Service / Acting 2IC (below)
CUSTOMER SERVICE / ACTING ASSISTANT BRANCH MANAGER
HIREQUIP
AUCKLAND, NZ
04.2007 - 01.2009
- Demonstrate equipment use & safety techniques to customers
- Regular stock takes
- After hours call outs
- Coordinate equipment deliveries with sales team and preferred suppliers
- Assist branch manager with month end billing
- Plus all other duties as per Customer Service /
- Driver role (below)
APPRENTICE DIESEL MECHANIC | CUMMINS ENGINE CO
AUCKLAND, NZ
01.2001 - 12.2003
- Repair and/or rebuild engines including road transport, marine and mining equipment, Turbo
- Chargers and Injectors
- Forklift operation
- Operate gantry crane
- Service and lube equipment
- Assist Trade Qualified Mechanics
Energy Works
01.2022
- OMV Maui Production Station, Turnaround Mechanical Fitting
- 13.5 hour days on a 13:1 roster Flange management during shutdown to open and close systems for inspection Isolations for confined space entry into vessels Bundle pulling for heat exchanger Modification of Fin Fans to include plenums Remobilisation of plant
01.2020
- STAY AT HOME PARENT
Timeline
Driver, APPRENTICE MECHANICAL FITTER
BDX GROUP, WHANGAREI
04.2022 - Current
Energy Works
01.2022
RAIL PROTECTION OFFICER
KIWIRAIL NEW ZEALAND
01.2021 - 02.2022
01.2020
SERVICE TECHNICIAN
LANCER WORLDWIDE
08.2017 - 05.2020
MECHANICAL TRADE ASSISTANT
CB&I CONSTRUCTORS
06.2014 - 06.2016
MECHANICAL TRADE ASSISTANT
CB&I CONSTRUCTORS
04.2014 - 05.2014
TECHNICAL ASSISTANT / TEAM LEADER
CTI LOGISTICS
04.2013 - 04.2014
FIRE ASSAY | AUSTRALIAN LABORATORY SERVICES, ALS
12.2012 - 03.2013
ASSISTANT BRANCH MANAGER
HIREQUIP
01.2009 - 10.2012
CUSTOMER SERVICE / ACTING ASSISTANT BRANCH MANAGER
HIREQUIP
04.2007 - 01.2009
APPRENTICE DIESEL MECHANIC | CUMMINS ENGINE CO
01.2001 - 12.2003
Similar Profiles
Maria EydisMaria Eydis
Assistant Project Manager at BDx Data CenersAssistant Project Manager at BDx Data Ceners
Pramesh Kumar MishraPramesh Kumar Mishra
Accounting Lead at Bdx India Pvt. Ltd.Accounting Lead at Bdx India Pvt. Ltd.
Dastagir KaziDastagir Kazi
IT Helpdesk at BDx India Pvt LtdIT Helpdesk at BDx India Pvt Ltd
Ronan FallonRonan Fallon
Crew Trainer at Bank Street McDonaldsCrew Trainer at Bank Street McDonalds
Cornelia JAcobsCornelia JAcobs
Sourcing and Delivery Lead at Younity New ZealandSourcing and Delivery Lead at Younity New Zealand