Tulia Dikere

Work History

Team Member

KFC

08.2023 - Current

Trained new team members by relaying information on company procedures and safety requirements.
Developed strong cooperative relationships with coworkers and managers.
Contributed to team success by completing jobs quickly and accurately.
Kept work areas clean, organized, and safe to promote efficiency and team safety.
Worked different stations to provide optimal coverage and meet production goals.
Broke down boxes and cartons, disposing of refuse in proper cardboard receptacles.
Worked scheduled shifts and remained available to work during coworker absences, holidays, and busy periods.
Learned all required tasks quickly to maximize performance.
Developed strong customer service and product knowledge skills to enhance individual and team performance.
Addressed and resolved customer complaints in polite and professional manner.
Observed packing operations to verify conformance to specifications.

Electrician

Powerkam Electrical Service

01.2014 - 12.2020

Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
Stored and maintained power tools and equipment for each job.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
Inspected worksites and installations to verify compliance with state safety codes.
Installed and wired electrical transformers, service panels, and circuit breakers.
Enhanced quality control by inspecting condition of equipment and tools.
Performed routine and complex maintenance and repairs on various electrical equipment.
Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Instructed customers on proper use and safety of electrical systems and equipment.
Installed 120/208 volt systems and 347/600 volt systems.
Followed state and local building regulations based on National Electrical Code.
Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
Fabricated custom and replacement parts according to specifications, using hand tools.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Studied building schematics to determine location of wiring and equipment.
Examined electrical units for loose connections and broken insulation.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Managed business report generation, recordkeeping and supply ordering.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Troubleshot and repaired malfunctioning systems and components.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.

Electrician

Electrical Maintenance Service

01.2013 - 01.2014

Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
Stored and maintained power tools and equipment for each job.
Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
Inspected worksites and installations to verify compliance with state safety codes.
Installed and wired electrical transformers, service panels, and circuit breakers.
Enhanced quality control by inspecting condition of equipment and tools.
Performed routine and complex maintenance and repairs on various electrical equipment.
Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Instructed customers on proper use and safety of electrical systems and equipment.
Installed 120/208 volt systems and 347/600 volt systems.
Followed state and local building regulations based on National Electrical Code.
Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
Fabricated custom and replacement parts according to specifications, using hand tools.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Studied building schematics to determine location of wiring and equipment.
Examined electrical units for loose connections and broken insulation.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Managed business report generation, recordkeeping and supply ordering.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Troubleshot and repaired malfunctioning systems and components.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.

Electrician

Matrix Limited

03.2011 - 01.2012

Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
Inspected worksites and installations to verify compliance with state safety codes.
Installed and wired electrical transformers, service panels, and circuit breakers.
Enhanced quality control by inspecting condition of equipment and tools.
Performed routine and complex maintenance and repairs on various electrical equipment.
Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Instructed customers on proper use and safety of electrical systems and equipment.
Installed 120/208 volt systems and 347/600 volt systems.
Followed state and local building regulations based on National Electrical Code.
Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
Fabricated custom and replacement parts according to specifications, using hand tools.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Studied building schematics to determine location of wiring and equipment.
Examined electrical units for loose connections and broken insulation.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Managed business report generation, recordkeeping and supply ordering.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Troubleshot and repaired malfunctioning systems and components.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.

Electrician

Suva Electrical Service

07.2007 - 12.2010

Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
Inspected worksites and installations to verify compliance with state safety codes.
Installed and wired electrical transformers, service panels, and circuit breakers.
Performed routine and complex maintenance and repairs on various electrical equipment.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Instructed customers on proper use and safety of electrical systems and equipment.
Installed 120/208 volt systems and 347/600 volt systems.
Followed state and local building regulations based on National Electrical Code.
Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
Fabricated custom and replacement parts according to specifications, using hand tools.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
Studied building schematics to determine location of wiring and equipment.
Examined electrical units for loose connections and broken insulation.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Managed business report generation, recordkeeping and supply ordering.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Troubleshot and repaired malfunctioning systems and components.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.

Summary

Overview

Work History

Team Member

Electrician

Electrician

Electrician

Electrician

Education

Trade Certificate In Electrical Engineering - Electrical Engineering

Skills

Accomplishments

Timeline

Similar Profiles

Ilona LambIlona Lamb

LUCAS BONNETTLUCAS BONNETT

Milad SafariMilad Safari