Ezra Clark
Glenfeild,Auckland
Summary
Knowledgeable Drainlayer skilled in laying water, sewer and drainage pipes, as well as installing manholes and cesspits for new and existing commercial and residential projects. Experienced in reading and interpreting blueprints and schematics, following orders and independently correcting problems. I have gained this expertise over my 10 year career.
Overview
13
13
years of professional experience
Work History
Drainlayer Labourer
HT Drainage and Earthworks
Kumeu
12.2023 - Current
- Inspected existing drainage systems to identify problems and create solutions.
- Excavated trenches and dug out soil to lay pipes or drains.
- Installed underground drainage systems, including manholes and catch basins.
- Removed debris from trench lines with shovels, rakes, and other tools.
- Connected sump pumps to the drainage system.
- Utilized laser-leveling equipment to ensure proper grading of the land around pipes or drains.
- Tested newly installed drainage systems to make sure they are working properly.
- Ensured compliance with local building codes related to drain installation.
- Repaired broken or damaged drainpipes using appropriate repair methods such as patching, soldering, epoxy coating.
- Handled assembly and installation of underground piping, fittings and valves for storm drains and water mains.
- Cut down and removal of trees using machinery
- Repaired fence
- appropriate and safe use of all machinery needed to get the job done.
Drainlayer Apprentice
Drainco
Glen Eden, Auckland
04.2017 - 01.2022
- Backfilled excavated locations after completion of work to protect piping and prepare for final grading.
- Graded and leveled trench bases using tamping machines and hand tools.
- Located underground utilities in preparation for digging and marked locations to prevent damage.
- Installed water, sewer and storm drain systems, laying as many as 35 metres per day personally, or 75 metres as a team.
- Beginner level of Front-end loader operation.
- Followed written instructions, schematics and blueprints to lay out pipe in correct arrangements.
- Located existing pipes requiring repair or replacement using magnetic and radio indicators.
- Filled pipes with sand or resin to prevent distortion for proper installation.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Maximized passenger satisfaction by maintaining vehicles in safe and clean operating condition.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Prioritized and organized tasks to efficiently accomplish service goals.
- Demonstrated leadership by making improvements to work processes and helping to train others.
- Reported project progress, site problems and labor status to supervisors.
- Delegated work to staff, setting priorities and goals.
- Provided training to newly hired employees
- Trained and monitored employees to teach daily tasks and improve performance.
- Run own crews on site.
- Site safe certificate
- Tested piping systems with water and air pressure to maintain balance and accuracy.
- Performed pipe fabrication, installation and fitting according to proper specifications.
- Cut openings in walls and floors to accommodate pipe and pipe fittings.
- Cut and beveled piping using cutting torches, saws and threading machines.
- Installed and extended underground storm, sanitation and water piping systems to connect fixtures and plumbing.
- Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
- Assembled and installed metal and nonmetal valves, pipe fittings and pipes.
- Located and repaired leaks in water supply lines.
- Operated excavators and other construction equipment to properly grade land.
- Operated front-end loaders, skid steers and mini excavators to carry out diverse project needs.
- Operated heavy equipment in compliance with company's operating safety policies and procedures.
- Loaded earth, debris and rubble onto trucks and conveyors for removal from construction site.
- Observed potential hazards and obstructions to maximize safe working conditions.
- Ditched and backfilled steep terrain and side slopes.
- Mixed porridge of catch basins and poured and sawed off concrete and asphalt.
- Placed blocks and outriggers to prevent capsizing of machines while lifting heavy loads.
- knowledge of exchanging bucket heads and rigging new attachments.
- Built and maintained inclines and ramps for site personnel.
Drainlayer
Lester Drainage
North Shore , Auckland
01.2012 - 03.2017
- Backfilled excavated locations after completion of work to protect piping and prepare for final grading.
- Graded and leveled trench bases using tamping machines and hand tools.
- Located underground utilities in preparation for digging and marked locations to prevent damage.
- Installed water, sewer and storm drain systems, laying as many as 35 metres per day personally, or 75 metres as a team.
- Beginner level of Front-end loader operation.
- Followed written instructions, schematics and blueprints to lay out pipe in correct arrangements.
- Located existing pipes requiring repair or replacement using magnetic and radio indicators.
- Filled pipes with sand or resin to prevent distortion for proper installation.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Maximized passenger satisfaction by maintaining vehicles in safe and clean operating condition.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Prioritized and organized tasks to efficiently accomplish service goals.
- Demonstrated leadership by making improvements to work processes and helping to train others.
- Reported project progress, site problems and labor status to supervisors.
- Delegated work to staff, setting priorities and goals.
- Provided training to newly hired employees
- Trained and monitored employees to teach daily tasks and improve performance.
- Run own crews on site.
- Site safe certificate
- Tested piping systems with water and air pressure to maintain balance and accuracy.
- Performed pipe fabrication, installation and fitting according to proper specifications.
- Cut openings in walls and floors to accommodate pipe and pipe fittings.
- Cut and beveled piping using cutting torches, saws and threading machines.
- Installed and extended underground storm, sanitation and water piping systems to connect fixtures and plumbing.
- Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
- Assembled and installed metal and nonmetal valves, pipe fittings and pipes.
- Located and repaired leaks in water supply lines.
- Operated excavators and other construction equipment to properly grade land.
- Operated front-end loaders, skid steers and mini excavators to carry out diverse project needs.
- Operated heavy equipment in compliance with company's operating safety policies and procedures.
- Loaded earth, debris and rubble onto trucks and conveyors for removal from construction site.
- Observed potential hazards and obstructions to maximize safe working conditions.
- Ditched and backfilled steep terrain and side slopes.
- Mixed porridge of catch basins and poured and sawed off concrete and asphalt.
- Placed blocks and outriggers to prevent capsizing of machines while lifting heavy loads.
- knowledge of exchanging bucket heads and rigging new attachments.
- Built and maintained inclines and ramps for site personnel.
Timber Machinist
Kiwi Pallets
Kaiapoi, Christchurch
02.2011 - 01.2012
- Tended machines during operation to monitor progress and adjust controls, maintaining optimal speeds and tension.
- Counted, sorted and stacked finished workpieces.
- Used hand tools to adjust bolts, clamps, stops and guides.
- Adjusted speeds on cutting machines to clear jams and keep equipment functional.
- Lubricated and clean machines with grease guns or solvents.
- Trimmed lumber to straighten rough edges or remove defects.
- Reviewed production specifications to properly set up and calibrate machinery.
- Inspected stock to identify imperfections, assign grades and determine issues with production.
- Maintaining vehicles in safe and clean operating condition
- Built wooden shipping pallets using pneumatic nail gun, staple gun and hammer.
- Sorted, stacked and moved pallets using pallet jack and forklift.
- Communicated with supervisor to address issues or delays.
- Cut materials to specific size dimensions using circular saw.
- Organized warehouse by arranging materials, tools and equipment.
- Transported products to and from assembly line, loaded assembly line and identified and removed flawed packages.
- Calculated dimensions and used tape measure to mark materials for cutting.
- Loaded and unloaded trucks, operated depalletizing equipment and maintained neat and orderly warehouse and shipping area.
- Monitored product flow from conveyor system to palletizing equipment to identify packages and pinpoint damaged cartons.
- Set up rigging and loading equipment daily and observed safety procedures to minimize risks.
- Maneuvered forklift over and around loaded pallets, boxes and other materials.
- Unloaded incoming items from trucks and rail cars and transported materials to staging area.
- Transported material to correct locations and documented inventory changes.
- Moved freight, stock and other materials to and from storage and production areas and loading docks.
- Communicated with supervisor and other warehouse staff to coordinate work.
- Acted as spotter to alert forklift driver if products were slipping or falling.
Education
Site Safe Certificate - Occupational Health And Safety
Site Safe
Auckland, NZ2021
Confined Spaces - Drainage
Unitec
Auckland 2021
First Aid - Drainge
Untiec
Auckland, NZ2021
Bridging Courses - Bridging And Education
Bridging Courses
New Zealand 2009
Par 1 And 2 - Baking
Baking Apprenticeship
Auckland, NZ2005
Certificate in Drainage - Drainage, Plumbing And Gasfitting
Untiec
AucklandSome College (No Degree) - NCEA
Kelston Boys' High School
New Lynn, NZSkills
- Equipment Maintenance
- Schematic Interpretation
- Water Line Laying
- Pipe Cutting
- Equipment Operation
- Customer Service
- First Aid/CPR
- Basic Math
- Critical Thinking
- Maintenance & Repair
- PPE Use
- Crew supervision
- good work ethic
- Time management
- People Skills
- adaptability
References
- Mathew Fitzgerald - 0211821153 (work Reference)
- Hamish McDonald - 021599908 (Director @ HTDE current work reference)
- Tony Hopkins - 0275298458 (Foreman @ HTDE current work reference)
- Varun Chada - 02108835539 (work Reference)
- Tiana Aitken - 0223557028 (Character /Study Reference)
Timeline
Drainlayer Labourer
HT Drainage and Earthworks
12.2023 - Current
Drainlayer Apprentice
Drainco
04.2017 - 01.2022
Drainlayer
Lester Drainage
01.2012 - 03.2017
Timber Machinist
Kiwi Pallets
02.2011 - 01.2012
Site Safe Certificate - Occupational Health And Safety
Site Safe
Confined Spaces - Drainage
Unitec
First Aid - Drainge
Untiec
Bridging Courses - Bridging And Education
Bridging Courses
Par 1 And 2 - Baking
Baking Apprenticeship
Certificate in Drainage - Drainage, Plumbing And Gasfitting
Untiec
Some College (No Degree) - NCEA
Kelston Boys' High School
Similar Profiles
Morgan NunezMorgan Nunez
Assembly Line Worker at Intelliworks HTAssembly Line Worker at Intelliworks HT
Roselande ExilRoselande Exil
Warehouse Worker at Fabric HtWarehouse Worker at Fabric Ht
Tomasz JonczakTomasz Jonczak
MES Superuser at Johnson Matthey HTMES Superuser at Johnson Matthey HT
